annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
Check if the microphone is connected to the correct input.
Volledig artikel weergeven
If the volume on your product changes automatically, check whether the volume buttons on the device are operable or jammed.
Volledig artikel weergeven
For some error symptoms there are currently no universal answers.
Volledig artikel weergeven
Image flicker usually only occurs with digital monitors if an incorrect screen refresh rate is set.
Volledig artikel weergeven
Please check the resolution of your display (screen) to see if the number of pixel errors is still within the specified tolerance range.
Volledig artikel weergeven
If you have a problem with the flash or the photo light, check the menu of your camera if the flash is activated.
Volledig artikel weergeven
Please check first whether the right signal source, e.g. TV or digital cable is selected.
Volledig artikel weergeven
There are several sources that may cause the lack of SAT reception such as a broken LNB, an obstructed SAT dish after a storm, broken cables, etc.
Volledig artikel weergeven
There are several reasons why there is no HDTV signal. The following instructions will help you to set up your HDTV signal.
Volledig artikel weergeven
The function of infrared connections requires unrestricted visual contact.
Volledig artikel weergeven
This could be due to a too low refresh rate (Hertz).
Volledig artikel weergeven
Some devices have a pause function, please check if pause has been activated.
Volledig artikel weergeven
Follow the points in this FAQ if your device is too dark or too bright.
Volledig artikel weergeven
If your product is being used as an external player please check if the connection cable is properly plugged in.
Volledig artikel weergeven
You can test with a digital camera if the remote control emits a signal.
Volledig artikel weergeven
If the spots always remain in the same place even when the picture changes it will be pixel errors.
Volledig artikel weergeven
First, attach your device to a different power outlet and see if this results in the fuse tripping.
Volledig artikel weergeven
If your memory card is no longer recognized, it needs to be repaired or replaced.
Volledig artikel weergeven
Check the primary side power supply and, if present, the on / off switch of the power supply.
Volledig artikel weergeven
Check with the pixel error class if it is a warranty case.
Volledig artikel weergeven
Topbijdragers