annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
Check if the microphone is connected to the correct input.
Afficher l'article complet
If the volume on your product changes automatically, check whether the volume buttons on the device are operable or jammed.
Afficher l'article complet
For some error symptoms there are currently no universal answers.
Afficher l'article complet
Image flicker usually only occurs with digital monitors if an incorrect screen refresh rate is set.
Afficher l'article complet
Please check the resolution of your display (screen) to see if the number of pixel errors is still within the specified tolerance range.
Afficher l'article complet
If you have a problem with the flash or the photo light, check the menu of your camera if the flash is activated.
Afficher l'article complet
Please check first whether the right signal source, e.g. TV or digital cable is selected.
Afficher l'article complet
There are several sources that may cause the lack of SAT reception such as a broken LNB, an obstructed SAT dish after a storm, broken cables, etc.
Afficher l'article complet
There are several reasons why there is no HDTV signal. The following instructions will help you to set up your HDTV signal.
Afficher l'article complet
The function of infrared connections requires unrestricted visual contact.
Afficher l'article complet
This could be due to a too low refresh rate (Hertz).
Afficher l'article complet
Some devices have a pause function, please check if pause has been activated.
Afficher l'article complet
The setting options differ depending on the product.
Afficher l'article complet
If your product is being used as an external player please check if the connection cable is properly plugged in.
Afficher l'article complet
You can test with a digital camera if the remote control emits a signal.
Afficher l'article complet
If the spots always remain in the same place even when the picture changes it will be pixel errors.
Afficher l'article complet
First, attach your device to a different power outlet and see if this results in the fuse tripping.
Afficher l'article complet
If your memory card is no longer recognized, it needs to be repaired or replaced.
Afficher l'article complet
Check the primary side power supply and, if present, the on / off switch of the power supply.
Afficher l'article complet
Check with the pixel error class if it is a warranty case.
Afficher l'article complet
Principaux contributeurs