annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
If you have a problem with the flash or the photo light, check the menu of your camera if the flash is activated.
Volledig artikel weergeven
One reason for this may be that the handset is not connected to the base station.
Volledig artikel weergeven
Sometimes it is enough to reinstall or update the driver so that everything works again.
Volledig artikel weergeven
Please check first whether the right signal source, e.g. TV or digital cable is selected.
Volledig artikel weergeven
There are several reasons why there is no HDTV signal. The following instructions will help you to set up your HDTV signal.
Volledig artikel weergeven
To ensure that the stations are stored correctly and not misaligned, perform a channel scan again as described in the user manual.
Volledig artikel weergeven
There are several sources that may cause the lack of SAT reception such as a broken LNB, an obstructed SAT dish after a storm, broken cables, etc.
Volledig artikel weergeven
If you have no sound or the volume is too low from the connected speakers or headphones?
Volledig artikel weergeven
Does the power outlet, you have connected your products power lead to, work?
Volledig artikel weergeven
You can test with a digital camera if the remote control emits a signal.
Volledig artikel weergeven
First, the BIOS settings should be checked.
Volledig artikel weergeven
Check with the pixel error class if it is a warranty case.
Volledig artikel weergeven
Check the primary side power supply and, if present, the on / off switch of the power supply.
Volledig artikel weergeven
Some devices have a pause function, please check if pause has been activated.
Volledig artikel weergeven
In this case, a residual current discharge (power supply reset) can help.
Volledig artikel weergeven
The cause of the icy back wall is often due to an incorrectly sealed, dirty or deformed door seal.
Volledig artikel weergeven
There may be a cable break, one of the most common signs of wear on electrical equipment.
Volledig artikel weergeven
In the main menu of the camera you will find in the settings the option RESET ALL.
Volledig artikel weergeven
Please check the power supply first.
Volledig artikel weergeven
The drip tray access should be cleaned.
Volledig artikel weergeven
Topbijdragers