annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
Please test another socket in another circuit.
Volledig artikel weergeven
Check if the microphone is connected to the correct input.
Volledig artikel weergeven
If the volume on your product changes automatically, check whether the volume buttons on the device are operable or jammed.
Volledig artikel weergeven
For some error symptoms there are currently no universal answers.
Volledig artikel weergeven
Maybe your device was paired with two speakers during the quality control in the factory via Bluetooth, and this pairing hasn`t been canceled yet.
Volledig artikel weergeven
To ensure that the stations are stored correctly and not misaligned, perform a channel scan again as described in the user manual.
Volledig artikel weergeven
The function of infrared connections requires unrestricted visual contact.
Volledig artikel weergeven
This will tell you if your memory card is faulty.
Volledig artikel weergeven
You can test with a digital camera if the remote control emits a signal.
Volledig artikel weergeven
In this case, a residual current discharge (power supply reset) can help.
Volledig artikel weergeven
If your memory card is no longer recognized, it needs to be repaired or replaced.
Volledig artikel weergeven
Check the primary side power supply and, if present, the on / off switch of the power supply.
Volledig artikel weergeven
Please check the power supply first.
Volledig artikel weergeven
The following steps may help if your device does not turn off.
Volledig artikel weergeven
There may be a cable break, one of the most common signs of wear on electrical equipment.
Volledig artikel weergeven
Answers to frequently asked questions about the favorites portal
Volledig artikel weergeven
The radio catalog provider has been changed.
Volledig artikel weergeven
You can use the antenna connection with either the included wire antenna or another antenna that has a coaxial plug.
Volledig artikel weergeven
Sparks occur if the mains cable is plugged in before connecting to the audio system. To avoid this, first insert the plug into the device and then into the socket.
Volledig artikel weergeven
First find the desired station and save it according to the instructions. Then switch to FM mode for at least three seconds, after which the station should be permanently stored.
Volledig artikel weergeven
Topbijdragers