annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
Please test another socket in another circuit.
Afficher l'article complet
Check if the microphone is connected to the correct input.
Afficher l'article complet
If the volume on your product changes automatically, check whether the volume buttons on the device are operable or jammed.
Afficher l'article complet
For some error symptoms there are currently no universal answers.
Afficher l'article complet
Maybe your device was paired with two speakers during the quality control in the factory via Bluetooth, and this pairing hasn`t been canceled yet.
Afficher l'article complet
To ensure that the stations are stored correctly and not misaligned, perform a channel scan again as described in the user manual.
Afficher l'article complet
The function of infrared connections requires unrestricted visual contact.
Afficher l'article complet
This will tell you if your memory card is faulty.
Afficher l'article complet
You can test with a digital camera if the remote control emits a signal.
Afficher l'article complet
In this case, a residual current discharge (power supply reset) can help.
Afficher l'article complet
If your memory card is no longer recognized, it needs to be repaired or replaced.
Afficher l'article complet
Check the primary side power supply and, if present, the on / off switch of the power supply.
Afficher l'article complet
Please check the power supply first.
Afficher l'article complet
The following steps may help if your device does not turn off.
Afficher l'article complet
There may be a cable break, one of the most common signs of wear on electrical equipment.
Afficher l'article complet
Answers to frequently asked questions about the favorites portal
Afficher l'article complet
The radio catalog provider has been changed.
Afficher l'article complet
You can use the antenna connection with either the included wire antenna or another antenna that has a coaxial plug.
Afficher l'article complet
Sparks occur if the mains cable is plugged in before connecting to the audio system. To avoid this, first insert the plug into the device and then into the socket.
Afficher l'article complet
First find the desired station and save it according to the instructions. Then switch to FM mode for at least three seconds, after which the station should be permanently stored.
Afficher l'article complet
Principaux contributeurs