cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Here we explain why your device cannot be switched on or the programme does not start.
View full article
The transport lock must be removed before initial start-up.
View full article
The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.
View full article
This may be due to a blocked drainage channel or a full drip tray.
View full article
There is a printing error in the operating instructions.
View full article
You can tell whether the Aquastop has been triggered and the valve has interrupted the water supply by looking at the window or the indicator field of the mechanical Aquastop system.
View full article
To do this, press the key combination Windows key + CTRL + Shift + B.
View full article
Perform a reception diagnosis as follows.
View full article
Tips and tricks for the sustainable descaling of your coffee machine
View full article
Optimise performance with the appropriate settings in the BIOS.
View full article
Clean the sensor surfaces with a dry cloth.
View full article
Answers to frequently asked questions about the LIFE S2000 smartband.
View full article
Here you will find detailed technical information about the mainboard.
View full article
Uninstalling all entries of the Microsoft virtual DVD-ROM drive device from the Device Manager removes the error.
View full article
Simply tighten the four screws on the underside of the unit.
View full article
To set the start time, press the PLAN button on the remote control.
View full article
Due to the routine clockwise rotation of the suction cups, it happens that the units themselves cover the virtual wall.
View full article
Follow the instructions in this FAQ.
View full article
This FAQ gives tips on how to isolate the error.
View full article
This may be due to a blocked drainage channel or a full drip tray.
View full article
Top Contributors