Why does my Ice Maker indicate a fault by flashing LEDs?

[#1]

Question

Why does my MEDION MD 17739 Ice Maker indicate a fault by flashing LEDs?

---

Answer

After prolonged use, depending on the lime content of the tap water, a layer of lime deposits builds up on the bottom of the water tray with ice scoop.

This can lead to a blockage of the ice scoop, which is indicated as a malfunction by the LEDs flashing. You should check your ice cube maker and remove this coating if necessary.

Use commercially available descaling powder for this. Dissolve about 1/4 teaspoon of the powder in lukewarm water and pour it onto the bottom of the ice tray. Let this solution soak in for some time, also observe the instructions for the descaling powder used. Then remove the solution and clean and rinse the floor well.

---

The information in this article refers to:

• Ice cube maker MEDION MD 17739 MSN 50056025
• Ice cube maker MEDION MD 17739 MSN 50061318
• Ice cube maker MEDION MD 17739 MSN 50064140
• Ice cube maker MEDION MD 17739 MSN 50066301
• Ice cube maker MEDION MD 17739 MSN 50066827
• Ice cube maker MEDION MD 17739 MSN 50069512
• Ice cube maker MEDION MD 17739 MSN 50069513
• Ice cube maker MEDION MD 17739 MSN 50072761
• Ice cube maker MEDION MD 17739 MSN 50073745

Article in other languages:

• Deutsch
• Español
• Français
• Nederlands

Review Date: 2024-01-14