FAQs

BIOS updates are requested for the current MEDION devices

The radio catalog provider has been changed.

This could be due to a too low refresh rate (Hertz).

If the volume decreases or increases automatically, it may be because the button is jammed on the remote control

If the volume on your product changes automatically check if the volume buttons on the device are operable and not stuck or jammed.

If you have problems with the camera of your smartphone / tablet, then maybe the following tips will help you.

Some devices have a pause function that is controlled by the associated remote control, e.g. in TV, receivers, media players, etc. Please check if pause has been activated, and if it has you can deactivate it by simply pressing this pause button on the remote again. You will find more information on the remotes functions in the devices user manual.

If your product is being used as an external playback device (such as a monitor), you can set the desired brightness using the adjustment buttons on the playback device.

If your product is being used as an external player please check if the connection cable (for example HDMI, Scart, etc.) is properly plugged in. If you are unsure then unplug them and reiinsert them to make sure they are connected and seated correctly.

You can use a digital camera, webcam, smartphone, or tablet (but not an Apple product such as an iPhone because these products have an infrared filter) to test whether the remote is transmitting a signal.

With the error description you have provided, we can use our diagnostic app to determine if it is a fault.

If you have no sound or the volume is too low from the connected speakers or headphones?

Does the power outlet, you have connected your products power lead to, work?

First, the BIOS settings should be checked.

Windows offers Troubleshooting app for sound issues.

If the spots always remain in the same place even when the picture changes it will be pixel errors.

First, attach your device to a different power outlet and see if this results in the fuse tripping.

Battery powered devices offer some adjustment options to increase the runtime.

In this case, a residual current discharge (power supply reset) can help.

Install the fix for the Connection Wizard.