annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
Here we explain why your device cannot be switched on or the programme does not start.
Afficher l'article complet
The transport lock must be removed before initial start-up.
Afficher l'article complet
The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.
Afficher l'article complet
This may be due to a blocked drainage channel or a full drip tray.
Afficher l'article complet
There is a printing error in the operating instructions.
Afficher l'article complet
You can tell whether the Aquastop has been triggered and the valve has interrupted the water supply by looking at the window or the indicator field of the mechanical Aquastop system.
Afficher l'article complet
To do this, press the key combination Windows key + CTRL + Shift + B.
Afficher l'article complet
Perform a reception diagnosis as follows.
Afficher l'article complet
Tips and tricks for the sustainable descaling of your coffee machine
Afficher l'article complet
Optimise performance with the appropriate settings in the BIOS.
Afficher l'article complet
Clean the sensor surfaces with a dry cloth.
Afficher l'article complet
Answers to frequently asked questions about the LIFE S2000 smartband.
Afficher l'article complet
Here you will find detailed technical information about the mainboard.
Afficher l'article complet
Uninstalling all entries of the Microsoft virtual DVD-ROM drive device from the Device Manager removes the error.
Afficher l'article complet
Simply tighten the four screws on the underside of the unit.
Afficher l'article complet
To set the start time, press the PLAN button on the remote control.
Afficher l'article complet
Due to the routine clockwise rotation of the suction cups, it happens that the units themselves cover the virtual wall.
Afficher l'article complet
Follow the instructions in this FAQ.
Afficher l'article complet
This FAQ gives tips on how to isolate the error.
Afficher l'article complet
This may be due to a blocked drainage channel or a full drip tray.
Afficher l'article complet
Principaux contributeurs