cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Activate RAID mode in the BIOS and create the desired array. Then install Windows with the required drivers. Back up your data beforehand, as it may be lost.
View full article
Install the updated Control Centre Service by downloading the file UniwillService_3.33.24.0_.exe from the MEDION Service Portal.
View full article
Detailed technical specs of the notebooks.
View full article
Tips and tricks on how to reset your system.
View full article
Information on maximum memory expansion, SATA interfaces, M.2 slots and more.
View full article
Update drivers via Windows Update or Device Manager and check the success via the driver date in the Device Manager.
View full article
The remedy is to run a provided tool.
View full article
In this case, a residual current discharge (power supply reset) can help.
View full article
In this FAQ we show you a troubleshooting guide.
View full article
Please make sure the battery or batteries are inserted correctly into your product.
View full article
Please test another socket in another circuit.
View full article
This will tell you if your memory card is faulty.
View full article
First check if your notebook is getting enough cooling air. Even dusty fans degrade the cooling performance.
View full article
If you have no sound or the volume is too low from the connected speakers or headphones?
View full article
Please check the power supply first.
View full article
The following steps may help if your device does not turn off.
View full article
Answers to the most common questions about the processor vulnerabilities and attack scenarios Meltdown and Spectre.
View full article
Windows offers Troubleshooting app for sound issues.
View full article
BIOS updates are requested for the current MEDION devices
View full article
Due to their mechanical components, hard drives can make noises. If unusual noises occur, it is recommended to check the status of the hard drive using system commands and, if necessary, to use the manufacturer's diagnostic software.
View full article
Top Contributors