cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Go to Settings, then Activation, select the Store link and click Download to exit S Mode.
View full article
Check if the microphone is connected to the correct input.
View full article
For some error symptoms there are currently no universal answers.
View full article
Set the appropriate screen refresh rate (refresh rate).
View full article
Please check the resolution of your display (screen) to see if the number of pixel errors is still within the specified tolerance range.
View full article
For computers that are running with a Windows operating system, Windows offers its own troubleshooting which can help you immediately.
View full article
Sometimes it is enough to reinstall or update the driver so that everything works again.
View full article
Increasing volume usually results from faster running fans. This can be caused by continuous background processes or dusty fans.
View full article
This could be due to a too low refresh rate (Hertz).
View full article
To adjust the brightness, search for the corresponding settings on the device or in the software. This may vary depending on the type of device (monitor, PC, smartphone, TV).
View full article
If your product is being used as an external player please check if the connection cable is properly plugged in.
View full article
Does the power outlet, you have connected your products power lead to, work?
View full article
If the spots always remain in the same place even when the picture changes it will be pixel errors.
View full article
First, attach your device to a different power outlet and see if this results in the fuse tripping.
View full article
This FAQ gives you possible solutions on how to end the sleep mode.
View full article
If your memory card is no longer recognized, it needs to be repaired or replaced.
View full article
Check the primary side power supply and, if present, the on / off switch of the power supply.
View full article
Check with the pixel error class if it is a warranty case.
View full article
There may be a cable break, one of the most common signs of wear on electrical equipment.
View full article
Hard drives contain mechanical components, such as fast rotating metal plates and moving writing and reading heads which can cause noises such as buzzing, creaking, clicking and clunking during normal operation.
View full article
Top Contributors