cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Perform a reboot and restart or switch the diagnostics area to custom diagnosis.
View full article
Please check the power supply first.
View full article
Install the Life+ app, connect your smartphone to a 2.4 GHz Wi-Fi network and follow the instructions in the app to pair the robot vacuum cleaner. After a successful connection, the app will display a confirmation message.
View full article
Windows offers its own troubleshooting service that can help you immediately.
View full article
The problem can often be solved with one of the listed procedures.
View full article
The Bluetooth dongle may only be connected to PCs / notebooks that do not have their own Bluetooth chip installed.
View full article
The cache must be cleared, for this purpose the TV must be reset to factory settings.
View full article
Here you will find detailed technical information about the mainboard.
View full article
For some error symptoms there are currently no universal answers.
View full article
The error codes E3 and E7 indicate a defect in the heater or sensor.
View full article
Follow the steps of this guide.
View full article
Activate RAID mode in the BIOS and create the desired array. Then install Windows with the required drivers. Back up your data beforehand, as it may be lost.
View full article
Loosen the screws and then carefully separate the plastic clips that connect the housing halves. Please note that modifications to the device may limit the warranty, as only the delivery condition is fully guaranteed.
View full article
Check the power supply and install all the latest software updates. If necessary, uninstall problematic USB device drivers and restart.
View full article
Drivers without a setup file are installed via the device manager.
View full article
The procedure for unpacking depends on the file format used.
View full article
In this FAQ we explain the most common faults of your robot vacuum cleaner.
View full article
By using a light barrier, which creates a virtual wall via infrared signal.
View full article
You can test with a digital camera if the remote control emits a signal.
View full article
This may be caused by a swollen battery, which poses a fire risk. MEDION advises you not to use or charge the device and to prepare it safely for disposal.
View full article
Top Contributors