annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
Different numeral systems cause storage capacities to be represented differently.
Volledig artikel weergeven
Tips and tricks on how to reset your system.
Volledig artikel weergeven
Temporarily install another language, change your system to it and now exit S-mode.
Volledig artikel weergeven
You'll first need to install its language pack (if it's available).
Volledig artikel weergeven
The following steps may help if your device does not turn off.
Volledig artikel weergeven
Please test another socket in another circuit.
Volledig artikel weergeven
Check if the microphone is connected to the correct input.
Volledig artikel weergeven
Hard drives contain mechanical components, such as fast rotating metal plates and moving writing and reading heads which can cause noises such as buzzing, creaking, clicking and clunking during normal operation.
Volledig artikel weergeven
Please check the resolution of your display (screen) to see if the number of pixel errors is still within the specified tolerance range.
Volledig artikel weergeven
This will tell you if your memory card is faulty.
Volledig artikel weergeven
Increasing volume usually results from faster running fans. This can be caused by continuous background processes or dusty fans.
Volledig artikel weergeven
For computers that are running with a Windows operating system, Windows offers its own troubleshooting which can help you immediately.
Volledig artikel weergeven
Sometimes it is enough to reinstall or update the driver so that everything works again.
Volledig artikel weergeven
If you have no sound or the volume is too low from the connected speakers or headphones?
Volledig artikel weergeven
Does the power outlet, you have connected your products power lead to, work?
Volledig artikel weergeven
Check with the pixel error class if it is a warranty case.
Volledig artikel weergeven
Check the primary side power supply and, if present, the on / off switch of the power supply.
Volledig artikel weergeven
In this case, a residual current discharge (power supply reset) can help.
Volledig artikel weergeven
There may be a cable break, one of the most common signs of wear on electrical equipment.
Volledig artikel weergeven
Please check the power supply first.
Volledig artikel weergeven
Topbijdragers