cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
For this, the hinges and the mechanics must be mounted on the opposite side.
View full article
FAQs on error messages and mechanics of the coffee machine
View full article
Please test another socket in another circuit.
View full article
For some error symptoms there are currently no universal answers.
View full article
This will tell you if your memory card is faulty.
View full article
Check the primary side power supply and, if present, the on / off switch of the power supply.
View full article
Please check the power supply first.
View full article
The following steps may help if your device does not turn off.
View full article
There may be a cable break, one of the most common signs of wear on electrical equipment.
View full article
The cause of the icy back wall is often due to an incorrectly sealed, dirty or deformed door seal.
View full article
The drip tray access should be cleaned.
View full article
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
View full article
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
View full article
You can use standardised replacement bobbins or bobbins from sewing thread sets for the free arm sewing machine.
View full article
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
View full article
The appliance is always switched on using the power button.
View full article
The robot vacuum cleaner can only be used offline by pressing the start / pause button for vacuuming and mopping, as well as returning to the charging station. Many advanced functions and scheduled cleaning are not available without the app.
View full article
There is a button on the back of the device body for disassembly.
View full article
This can be rectified by updating the device firmware to version V0.3.7.
View full article
First check the power connection and settings. For optimum results, follow the recommended filling quantity, adjust the temperature and cooking time, divide the food evenly and clean the device regularly.
View full article
Top Contributors