annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
For this, the hinges and the mechanics must be mounted on the opposite side.
Volledig artikel weergeven
FAQs on error messages and mechanics of the coffee machine
Volledig artikel weergeven
Please test another socket in another circuit.
Volledig artikel weergeven
For some error symptoms there are currently no universal answers.
Volledig artikel weergeven
This will tell you if your memory card is faulty.
Volledig artikel weergeven
Check the primary side power supply and, if present, the on / off switch of the power supply.
Volledig artikel weergeven
Please check the power supply first.
Volledig artikel weergeven
The following steps may help if your device does not turn off.
Volledig artikel weergeven
There may be a cable break, one of the most common signs of wear on electrical equipment.
Volledig artikel weergeven
The cause of the icy back wall is often due to an incorrectly sealed, dirty or deformed door seal.
Volledig artikel weergeven
The drip tray access should be cleaned.
Volledig artikel weergeven
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
Volledig artikel weergeven
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
Volledig artikel weergeven
You can use standardised replacement bobbins or bobbins from sewing thread sets for the free arm sewing machine.
Volledig artikel weergeven
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
Volledig artikel weergeven
The appliance is always switched on using the power button.
Volledig artikel weergeven
The robot vacuum cleaner can only be used offline by pressing the start / pause button for vacuuming and mopping, as well as returning to the charging station. Many advanced functions and scheduled cleaning are not available without the app.
Volledig artikel weergeven
There is a button on the back of the device body for disassembly.
Volledig artikel weergeven
This can be rectified by updating the device firmware to version V0.3.7.
Volledig artikel weergeven
First check the power connection and settings. For optimum results, follow the recommended filling quantity, adjust the temperature and cooking time, divide the food evenly and clean the device regularly.
Volledig artikel weergeven
Topbijdragers