abbrechen
Suchergebnisse werden angezeigt für 
Stattdessen suchen nach 
Meintest du 

FAQs

Sortieren nach:
For this, the hinges and the mechanics must be mounted on the opposite side.
Vollständigen Artikel anzeigen
FAQs on error messages and mechanics of the coffee machine
Vollständigen Artikel anzeigen
Please test another socket in another circuit.
Vollständigen Artikel anzeigen
For some error symptoms there are currently no universal answers.
Vollständigen Artikel anzeigen
This will tell you if your memory card is faulty.
Vollständigen Artikel anzeigen
Check the primary side power supply and, if present, the on / off switch of the power supply.
Vollständigen Artikel anzeigen
Please check the power supply first.
Vollständigen Artikel anzeigen
The following steps may help if your device does not turn off.
Vollständigen Artikel anzeigen
There may be a cable break, one of the most common signs of wear on electrical equipment.
Vollständigen Artikel anzeigen
The cause of the icy back wall is often due to an incorrectly sealed, dirty or deformed door seal.
Vollständigen Artikel anzeigen
The drip tray access should be cleaned.
Vollständigen Artikel anzeigen
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
Vollständigen Artikel anzeigen
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
Vollständigen Artikel anzeigen
You can use standardised replacement bobbins or bobbins from sewing thread sets for the free arm sewing machine.
Vollständigen Artikel anzeigen
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
Vollständigen Artikel anzeigen
The appliance is always switched on using the power button.
Vollständigen Artikel anzeigen
The robot vacuum cleaner can only be used offline by pressing the start / pause button for vacuuming and mopping, as well as returning to the charging station. Many advanced functions and scheduled cleaning are not available without the app.
Vollständigen Artikel anzeigen
There is a button on the back of the device body for disassembly.
Vollständigen Artikel anzeigen
This can be rectified by updating the device firmware to version V0.3.7.
Vollständigen Artikel anzeigen
First check the power connection and settings. For optimum results, follow the recommended filling quantity, adjust the temperature and cooking time, divide the food evenly and clean the device regularly.
Vollständigen Artikel anzeigen
Top-Beitragsleistende