annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
Mount the supplied WLAN antennas.
Afficher l'article complet
The following steps may help if your device does not turn off.
Afficher l'article complet
Please make sure the battery or batteries are inserted correctly into your product.
Afficher l'article complet
Please test another socket in another circuit.
Afficher l'article complet
Check if the microphone is connected to the correct input.
Afficher l'article complet
Hard drives contain mechanical components, such as fast rotating metal plates and moving writing and reading heads which can cause noises such as buzzing, creaking, clicking and clunking during normal operation.
Afficher l'article complet
Please check the resolution of your display (screen) to see if the number of pixel errors is still within the specified tolerance range.
Afficher l'article complet
This will tell you if your memory card is faulty.
Afficher l'article complet
Increasing volume usually results from faster running fans. This can be caused by continuous background processes or dusty fans.
Afficher l'article complet
For computers that are running with a Windows operating system, Windows offers its own troubleshooting which can help you immediately.
Afficher l'article complet
Sometimes it is enough to reinstall or update the driver so that everything works again.
Afficher l'article complet
If you have no sound or the volume is too low from the connected speakers or headphones?
Afficher l'article complet
Does the power outlet, you have connected your products power lead to, work?
Afficher l'article complet
Check with the pixel error class if it is a warranty case.
Afficher l'article complet
Check the primary side power supply and, if present, the on / off switch of the power supply.
Afficher l'article complet
In this case, a residual current discharge (power supply reset) can help.
Afficher l'article complet
There may be a cable break, one of the most common signs of wear on electrical equipment.
Afficher l'article complet
Please check the power supply first.
Afficher l'article complet
First, attach your device to a different power outlet and see if this results in the fuse tripping.
Afficher l'article complet
If the spots always remain in the same place even when the picture changes it will be pixel errors.
Afficher l'article complet
Principaux contributeurs