cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Charge the discharged battery of your job site radio sufficiently before switching it on again.
View full article
If your web radio goes off when you lock the screen, this is due to standby mode. Set Never in the power options to prevent this.
View full article
The maximum possible memory expansion depends on the Windows version.
View full article
This FAQ shows you how to find out whether the device supports Windows Hello.
View full article
You can switch between tablet mode / desktop mode in the Info Centre.
View full article
The MSInfo32.exe programme available under all current Windows versions can be used for this purpose.
View full article
The company Hewlett Packard offers a diagnostic tool for printing and scanning problems for download.
View full article
Download the original software from the MEDION website, unzip the file on a USB stick and follow the instructions in the installation guide.
View full article
The temperature settings range between 16° C and 32° C (60.8° F and 89.6° Fahrenheit).
View full article
If two-step verification is enabled and no alternative verification method is available, Microsoft cannot help. Without this verification, you should try the sign-in utility or fill out the Microsoft account recovery form to get feedback.
View full article
This can be remedied by installing the Intel® Driver and Support Assistant.
View full article
This can be rectified by updating the device firmware to version V0.3.7.
View full article
This FAQ gives you information if the USB connection does not work.
View full article
Check the Device Manager (Windows key + X) under ‘Security devices’ for the TPM version. If no TPM is displayed, it may need to be activated in the BIOS.
View full article
With a Windows 10 upgrade, the Windows 10 versions offered correspond to the installed Windows 7 and Windows 8 editions.
View full article
Open the command prompt as administrator and enter "net user administrator /active:yes" to activate the account. Set a password with "net user administrator *".
View full article
First check the power connection and settings. For optimum results, follow the recommended filling quantity, adjust the temperature and cooking time, divide the food evenly and clean the device regularly.
View full article
The display is dimmed during the firmware update.
View full article
Note the points in this FAQ if no HDMI signal is available.
View full article
In the following table you will find an overview of the HDMI versions.
View full article
Top Contributors