cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
In this case, a residual current discharge (power supply reset) can help.
View full article
If your memory card is no longer recognized, it needs to be repaired or replaced.
View full article
Check the primary side power supply and, if present, the on / off switch of the power supply.
View full article
Please check the power supply first.
View full article
The following steps may help if your device does not turn off.
View full article
There may be a cable break, one of the most common signs of wear on electrical equipment.
View full article
Due to the routine clockwise rotation of the vacuum cleaner, it happens that the device themselve cover the virtual wall.
View full article
The alarm center receives firmware updates via OTA (Over the Air).
View full article
During cooling, the compressor continues to run.
View full article
This FAQ gives you the temperature range of the air conditioning system.
View full article
This can be rectified by updating the device firmware to version V0.3.7.
View full article
In this FAQ you will find useful information about your robot vacuum cleaner.
View full article
You can change the amount of water dispensed in the Life+ app.
View full article
Follow the individual points in this FAQ.
View full article
Additional cleaning agents can damage the robot vacuum cleaner.
View full article
Follow the instructions in this FAQ.
View full article
Follow the steps mentioned in this FAQ.
View full article
You can find the error diagnosis on the MEDION Service page.
View full article
The sensors are probably dirty or corroded, here we explain how to proceed.
View full article
The contacts of the dirty water tank are dirty, clean them carefully.
View full article
Top Contributors