cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
This can be rectified by updating the device firmware to version V0.3.7.
View full article
In this case, a residual current discharge (power supply reset) can help.
View full article
Please test another socket in another circuit.
View full article
Check if the microphone is connected to the correct input.
View full article
The function of infrared connections requires unrestricted visual contact.
View full article
Please make sure the battery or batteries are inserted correctly into your product.
View full article
Please check the power supply first.
View full article
For some error symptoms there are currently no universal answers.
View full article
In this FAQ you will find useful information about your robot vacuum cleaner.
View full article
You can test with a digital camera if the remote control emits a signal.
View full article
The alarm center receives firmware updates via OTA (Over the Air).
View full article
If your memory card is no longer recognized, it needs to be repaired or replaced.
View full article
Due to the routine clockwise rotation of the vacuum cleaner, it happens that the device themselve cover the virtual wall.
View full article
Open the maintenance door on the underside of the Robot vacuum Cleaner.
View full article
This will tell you if your memory card is faulty.
View full article
This could be due to the sound settings.
View full article
The following steps may help if your device does not turn off.
View full article
The error message “Please check clean water tank” can be caused by dirty detectors in the water tank. Cleaning with a salt solution or pH-neutral cleaning agent can help. Also check and clean the dirty water intake opening and the fresh water nozzle.
View full article
Answers to common questions about set-up and use.
View full article
Check the primary side power supply and, if present, the on / off switch of the power supply.
View full article
Top Contributors