cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
The error codes E01-E10 indicate various problems, such as blocked wheels, sensor faults, stuck positions or brush problems.
View full article
In this FAQ we show you a troubleshooting guide.
View full article
Detailed technical specs of the notebooks.
View full article
Information on maximum memory expansion, SATA interfaces, M.2 slots and more.
View full article
For this, the hinges and the mechanics must be mounted on the opposite side.
View full article
For some error symptoms there are currently no universal answers.
View full article
Download the new firmware upgrade from our service page.
View full article
BIOS updates are requested for the current MEDION devices
View full article
Check whether the overheating protection has been triggered and carry out a reset if necessary.
View full article
A 4K UHD TV box converts the signal and enables high-resolution reception on the TV via HDMI.
View full article
You can use the antenna connection with either the included wire antenna or another antenna that has a coaxial plug.
View full article
It means that problems occurred during the download / the web server delivered an error.
View full article
In this FAQ you will find useful information about your robot vacuum cleaner.
View full article
Set the water cooling to full speed in the BIOS.
View full article
Dock the robot vacuum cleaner manually, remove the mop beforehand and set the charging station upright. If problems persist, optimised charging contacts can be requested via MEDION Service.
View full article
Details on the maximum memory expansion, the front pin assignment and M.2 slots.
View full article
Answers to frequently asked questions about the DJ Controller Life X67000 MD 45000.
View full article
If your device does not start properly, disconnect all external devices and restart, or use the automatic repair and reset the PC. If this does not help, perform a system restore or repair the master boot record via the command prompt.
View full article
The remedy is to run a provided tool.
View full article
The cache must be cleared, for this purpose the TV must be reset to factory settings.
View full article
Top Contributors