FAQs

Different numeral systems cause storage capacities to be represented differently.

By using a light barrier, which creates a virtual wall via infrared signal.

The temperature unit of the display is set incorrectly. It can be changed via a key combination.

Reach into the opening and pull a little harder to change the filter.

In this FAQ we explain how to clean the impeller of your robot vacuum cleaner.

If you don't want to register a Microsoft account, you can alternatively create a local account.

The Fn key is a special key found especially on notebooks or netbooks.

Press the Power and WPS buttons simultaneously. Press and hold the buttons for 3 seconds.

Loosen the screws and then carefully separate the plastic clips that connect the housing halves. Please note that modifications to the device may limit the warranty, as only the delivery condition is fully guaranteed.

Depending on the selected language, keyboards have different layouts.

Open the maintenance door on the underside of the Robot vacuum Cleaner.

In this FAQ you will find information about the maximum memory capacity, the front pin assignment and M.2 slots.

Mount the supplied WLAN antennas.

We offer a firmware update for the radio.

Here you will find detailed technical information about the mainboard.