annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
Volledig artikel weergeven
Check whether the transport protection film is still on the display and remove it if necessary.
Volledig artikel weergeven
First find the desired station and save it according to the instructions. Then switch to FM mode for at least three seconds, after which the station should be permanently stored.
Volledig artikel weergeven
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
Volledig artikel weergeven
Clouding or the torch effect occurs on televisions with side LED backlighting when the light-conducting plastic panel becomes uneven due to overheating. Avoid heat sources such as heaters or direct sunlight and ensure sufficient air circulation.
Volledig artikel weergeven
If the MEDION Life+ app reports that the user does not exist, use the Forgot Password function on the MEDION website to receive a new password by e-mail.
Volledig artikel weergeven
Go to the device settings, select Connections and activate Mobile Hotspot and Tethering. Optionally, you can set a name and password for the network, after which you can connect other devices via Wi-Fi.
Volledig artikel weergeven
To connect an Android device to a PC, activate the Media Transfer Protocol (MTP) via the drop-down menu after connecting the USB cable. If it does not work, try reconnecting the cable or restarting the device.
Volledig artikel weergeven
To activate the hotspot on your iPhone, open the Settings app and select personal hotspot. Switch on the function and your hotspot is ready to use.
Volledig artikel weergeven
You can use standardised replacement bobbins or bobbins from sewing thread sets for the free arm sewing machine.
Volledig artikel weergeven
Insert the storage medium and load the record. Select PHON, position the tone arm and press REC / DEL to start recording. Select the bit rate and storage medium, lower the tone arm and end the recording with REC / DEL.
Volledig artikel weergeven
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
Volledig artikel weergeven
To start self-cleaning, press and hold the heating level button for 5 seconds.
Volledig artikel weergeven
It means that problems occurred during the download / the web server delivered an error.
Volledig artikel weergeven
Perform a reboot and restart or switch the diagnostics area to custom diagnosis.
Volledig artikel weergeven
Drivers without a setup file are installed via the device manager.
Volledig artikel weergeven
This error code is displayed if an attempt is made to activate Office before Windows itself has been activated.
Volledig artikel weergeven
The Temp folder is probably filled with application files (.appx) that are used by the Microsoft Store.
Volledig artikel weergeven
Under Account, you can switch between the Microsoft account or Local account as required.
Volledig artikel weergeven
The appliance is always switched on using the power button.
Volledig artikel weergeven
Topbijdragers