abbrechen
Suchergebnisse werden angezeigt für 
Stattdessen suchen nach 
Meintest du 

FAQs

Sortieren nach:
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
Vollständigen Artikel anzeigen
Check whether the transport protection film is still on the display and remove it if necessary.
Vollständigen Artikel anzeigen
First find the desired station and save it according to the instructions. Then switch to FM mode for at least three seconds, after which the station should be permanently stored.
Vollständigen Artikel anzeigen
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
Vollständigen Artikel anzeigen
Clouding or the torch effect occurs on televisions with side LED backlighting when the light-conducting plastic panel becomes uneven due to overheating. Avoid heat sources such as heaters or direct sunlight and ensure sufficient air circulation.
Vollständigen Artikel anzeigen
If the MEDION Life+ app reports that the user does not exist, use the Forgot Password function on the MEDION website to receive a new password by e-mail.
Vollständigen Artikel anzeigen
Go to the device settings, select Connections and activate Mobile Hotspot and Tethering. Optionally, you can set a name and password for the network, after which you can connect other devices via Wi-Fi.
Vollständigen Artikel anzeigen
To connect an Android device to a PC, activate the Media Transfer Protocol (MTP) via the drop-down menu after connecting the USB cable. If it does not work, try reconnecting the cable or restarting the device.
Vollständigen Artikel anzeigen
To activate the hotspot on your iPhone, open the Settings app and select personal hotspot. Switch on the function and your hotspot is ready to use.
Vollständigen Artikel anzeigen
You can use standardised replacement bobbins or bobbins from sewing thread sets for the free arm sewing machine.
Vollständigen Artikel anzeigen
Insert the storage medium and load the record. Select PHON, position the tone arm and press REC / DEL to start recording. Select the bit rate and storage medium, lower the tone arm and end the recording with REC / DEL.
Vollständigen Artikel anzeigen
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
Vollständigen Artikel anzeigen
To start self-cleaning, press and hold the heating level button for 5 seconds.
Vollständigen Artikel anzeigen
It means that problems occurred during the download / the web server delivered an error.
Vollständigen Artikel anzeigen
Perform a reboot and restart or switch the diagnostics area to custom diagnosis.
Vollständigen Artikel anzeigen
Drivers without a setup file are installed via the device manager.
Vollständigen Artikel anzeigen
This error code is displayed if an attempt is made to activate Office before Windows itself has been activated.
Vollständigen Artikel anzeigen
The Temp folder is probably filled with application files (.appx) that are used by the Microsoft Store.
Vollständigen Artikel anzeigen
Under Account, you can switch between the Microsoft account or Local account as required.
Vollständigen Artikel anzeigen
The appliance is always switched on using the power button.
Vollständigen Artikel anzeigen
Top-Beitragsleistende