Diese Website verwendet Cookies. Klicken Sie auf „Accept“ (Annehmen), wenn Sie der Verwendung von Cookies auf unserer Webseite zustimmen, wie in unserer Datenschutzrichtlinie beschrieben. Klicken Sie auf Präferenzen, um Ihre Cookie-Einstellungen anzupassen.
The ERAZER ControlCenter software can be used to activate or deactivate the USB ports in sleep mode or when switched off, even without a connected power supply unit.
Sparks occur if the mains cable is plugged in before connecting to the audio system. To avoid this, first insert the plug into the device and then into the socket.
Due to their mechanical components, hard drives can make noises. If unusual noises occur, it is recommended to check the status of the hard drive using system commands and, if necessary, to use the manufacturer's diagnostic software.
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
First find the desired station and save it according to the instructions. Then switch to FM mode for at least three seconds, after which the station should be permanently stored.
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
Clouding or the torch effect occurs on televisions with side LED backlighting when the light-conducting plastic panel becomes uneven due to overheating. Avoid heat sources such as heaters or direct sunlight and ensure sufficient air circulation.
If the MEDION Life+ app reports that the user does not exist, use the Forgot Password function on the MEDION website to receive a new password by e-mail.
Go to the device settings, select Connections and activate Mobile Hotspot and Tethering. Optionally, you can set a name and password for the network, after which you can connect other devices via Wi-Fi.
To connect an Android device to a PC, activate the Media Transfer Protocol (MTP) via the drop-down menu after connecting the USB cable. If it does not work, try reconnecting the cable or restarting the device.
Windows 11 requires at least a 1 GHz processor with 2 cores, 4 GB RAM, 64 GB storage space, TPM 2.0 and DirectX 12-capable graphics. Internet and a Microsoft account are required to install Windows 11 Home.
(en-gb) ▼ 
Klick hier, um diese Seite auf Deutsch zu lesen
Click here to read this page in English
Cliquez ici pour lire cette page en français
Klik hier om deze pagina in het Nederlands te lezen
