annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
The remedy is to run a provided tool.
Volledig artikel weergeven
In this case, a residual current discharge (power supply reset) can help.
Volledig artikel weergeven
Please test another socket in another circuit.
Volledig artikel weergeven
This will tell you if your memory card is faulty.
Volledig artikel weergeven
Please check the power supply first.
Volledig artikel weergeven
The following steps may help if your device does not turn off.
Volledig artikel weergeven
You can connect your MEDION TV to your soundbar via various connections. These include HDMI, AUX or the optical connection.
Volledig artikel weergeven
Charge the discharged battery of your job site radio sufficiently before switching it on again.
Volledig artikel weergeven
This FAQ gives you information if the USB connection does not work.
Volledig artikel weergeven
The display is dimmed during the firmware update.
Volledig artikel weergeven
Note the points in this FAQ if no HDMI signal is available.
Volledig artikel weergeven
In the following table you will find an overview of the HDMI versions.
Volledig artikel weergeven
Carry out the firmware upgrade as described in this FAQ.
Volledig artikel weergeven
You can find the error diagnosis on the MEDION Service page.
Volledig artikel weergeven
Press the multifunction button for 13 seconds when the unit is switched off.
Volledig artikel weergeven
Simply tighten the four screws on the underside of the unit.
Volledig artikel weergeven
Here you can find out how to make a recording.
Volledig artikel weergeven
Windows offers the troubleshooting app for sound problems.
Volledig artikel weergeven
Unfortunately, https links are not supported by older Internet radios.
Volledig artikel weergeven
The connection is established via the MEDION Speaker App.
Volledig artikel weergeven
Topbijdragers