FAQs

In this case, a residual current discharge (power supply reset) can help.

Answers to common questions about the Intel Management Engine (SA-00086) vulnerability.

Depending on which interfaces are provided by a M.2 connector, a specific form of the connection is used.

Switch off the keyboard, remove the 2.4G receiver, press ESC + Q and plug the receiver back in. For the mouse, hold down the scroll wheel and the right mouse button while switching it on and then plug in the receiver. Bring both devices close to the receiver until the flashing stops.

Carry out the appropriate firmware update as described in the FAQ.

In this FAQ we explain what you can check.

Answers to the most common questions about the processor vulnerabilities and attack scenarios Meltdown and Spectre.

Here you will find solutions for solving Bluetooth problems.

Set the appropriate screen refresh rate (refresh rate).

In case of app problems, follow the points in this FAQ.

Please test another socket in another circuit.

This FAQ explains how to start Safe Mode in Windows 10.

In this FAQ we show you a troubleshooting guide.

Steps on how to get into the Windows Device Manager of Windows.

Flashes or sparks in the microwave are caused by dirt, metal objects or a scratched coating. Switch off the microwave immediately to prevent damage.

For computers that are running with a Windows operating system, Windows offers its own troubleshooting which can help you immediately.

This FAQ will help you with Bluetooth pairing difficulties.

Check if the microphone is connected to the correct input.

If you have no sound or the volume is too low from the connected speakers or headphones?

The radio catalog provider has been changed.