annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
A subsequent update will fix the problem.
Afficher l'article complet
Switch to PERSONAL mode to customize your TV picture settings.
Afficher l'article complet
Optimise your Desktop PC with a BIOS update for your mainboard, but please note that this is done at your own risk and MEDION accepts no liability.
Afficher l'article complet
Bluetooth pairing problems can be caused by device settings or app authorisations. Check all devices and apps involved to resolve connection problems.
Afficher l'article complet
The NUM Lock function is probably active. Switch it off by pressing the SHIFT + FN + NUM Lock, FN + Ins or FN + NUM buttons simultaneously.
Afficher l'article complet
Switch off the refrigerator, unplug the mains plug, remove the lamp cover and replace the bulb with a suitable one.
Afficher l'article complet
Switch off the wine temperature control cabinet, disconnect the cables, press and hold the power button for 15 seconds and restart it after reconnecting.
Afficher l'article complet
Here you will find detailed technical information about the mainboard.
Afficher l'article complet
Install the software patch by downloading the file, unzipping it and executing it with administrator rights to activate the CoPilot button.
Afficher l'article complet
You can use the antenna connection with either the included wire antenna or another antenna that has a coaxial plug.
Afficher l'article complet
Switch off the device, clean the lens on the bumper and test the mobility of the bumper. Then lift the robot and check the underside of the front bumper for foreign objects, which should be removed if necessary.
Afficher l'article complet
The grill does not switch off due to a fault, the indicator light goes out when the temperature is reached. If there are problems with heating up, check the socket, extension cable and temperature control connection.
Afficher l'article complet
If warm air gets inside the fridge, the moisture will freeze when it cools down. To avoid this, the door should not be left open for long, it must close properly and only cooled food should be placed inside.
Afficher l'article complet
Flashes or sparks in the microwave are caused by dirt, metal objects or a scratched coating. Switch off the microwave immediately to prevent damage.
Afficher l'article complet
Sparks occur if the mains cable is plugged in before connecting to the audio system. To avoid this, first insert the plug into the device and then into the socket.
Afficher l'article complet
A slow or crashing system may be due to outdated software or full hard drives. Update regularly and use tools such as the MEDION Service App to detect errors.
Afficher l'article complet
Use the MSInfo32 program, which is started by entering ‘msinfo32’ in the Run dialogue (Windows key + r). There you will find the mainboard designation under ‘System overview’ behind ‘BaseBoard product’.
Afficher l'article complet
MEDION devices use an alphanumeric code. Contact the manufacturer of the universal remote control, as the codes are defined there and vary depending on the remote control.
Afficher l'article complet
Check in the settings under HDMI EDID whether HDMI 1.4 is selected and change it from 2.0 to 1.4 if necessary.
Afficher l'article complet
Fold a handkerchief into a square, place it over the ink tank sealing lever and secure the filling opening with adhesive tape to prevent the ink from leaking.
Afficher l'article complet
Principaux contributeurs