annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
Here you can read how to set up a No Go Zone.
Volledig artikel weergeven
The contacts of the dirty water tank are dirty, clean them carefully.
Volledig artikel weergeven
Do not connect the unit to the power supply and follow the further procedure in this FAQ.
Volledig artikel weergeven
Please note the following table.
Volledig artikel weergeven
Open the maintenance door on the underside of the Robot vacuum Cleaner.
Volledig artikel weergeven
For some error symptoms there are currently no universal answers.
Volledig artikel weergeven
The sensors are set up via the Smart Home app.
Volledig artikel weergeven
Here you will find general information about your wireless doorbell.
Volledig artikel weergeven
The following steps may help if your device does not turn off.
Volledig artikel weergeven
Please make sure the battery or batteries are inserted correctly into your product.
Volledig artikel weergeven
Please test another socket in another circuit.
Volledig artikel weergeven
Check if the microphone is connected to the correct input.
Volledig artikel weergeven
This could be due to the sound settings.
Volledig artikel weergeven
The function of infrared connections requires unrestricted visual contact.
Volledig artikel weergeven
This will tell you if your memory card is faulty.
Volledig artikel weergeven
You can test with a digital camera if the remote control emits a signal.
Volledig artikel weergeven
Check the primary side power supply and, if present, the on / off switch of the power supply.
Volledig artikel weergeven
In this case, a residual current discharge (power supply reset) can help.
Volledig artikel weergeven
There may be a cable break, one of the most common signs of wear on electrical equipment.
Volledig artikel weergeven
Please check the power supply first.
Volledig artikel weergeven
Topbijdragers