cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
If the device does not pump out water, this may be due to a blocked strainer.
View full article
By opening the door immediately after the end of the programme, a stream of warm air should come out of the machine.
View full article
The appliance is not drawing water, the water pressure is too low or the aquastop has been triggered.
View full article
The error code E8 says that the corner valve is defective.
View full article
This can happen if the wrong cleaner is used.
View full article
This can happen due to a combination of too soft water and too much detergent.
View full article
First, please check whether all inlet valves are open.
View full article
You can calculate the water pressure approximately with the help of a 10-litre water bucket and a stopwatch
View full article
Here we explain why your device cannot be switched on or the programme does not start.
View full article
You can tell whether the Aquastop has been triggered and the valve has interrupted the water supply by looking at the window or the indicator field of the mechanical Aquastop system.
View full article
You can find this information in the Windows Task-Manager.
View full article
In this FAQ we explain the most common faults of your robot vacuum cleaner.
View full article
Remote controls for older MEDION devices
View full article
The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.
View full article
The connection is established via the MEDION Speaker App.
View full article
Here we explain the correct cleaning procedure.
View full article
Tips for changing a WLAN system to a new one.
View full article
Tips and tricks for the sustainable descaling of your coffee maker.
View full article
In this FAQ we explain where you can get codes for universal remote controls.
View full article
Perform a reception diagnosis as follows.
View full article
Top Contributors