Deze website gebruikt cookies. Klik op Accepteren om akkoord te gaan met het cookie-gebruik van onze website, zoals wordt beschreven in ons Privacy-beleid. Klik op Voorkeuren om uw cookie-instellingen aan te passen.
A UEFI-bootable USB stick is used for flexible Windows installation. This USB stick can be easily created with tools such as Media Creation Tool or Rufus by downloading the Windows ISO file from Microsoft.
Use the system configuration, a boot medium or the repair mode after a failed start. It is used for troubleshooting with minimal drivers and functions.
A slow or crashing system may be due to outdated software or full hard drives. Update regularly and use tools such as the MEDION Service App to detect errors.
Use the MSInfo32 program, which is started by entering ‘msinfo32’ in the Run dialogue (Windows key + r). There you will find the mainboard designation under ‘System overview’ behind ‘BaseBoard product’.
Open the Start menu and click on ‘Restart’ while holding down the ‘Shift’ key. Then select ‘Troubleshooting’, ‘Advanced options’ and then ‘UEFI firmware settings’ to go directly to the BIOS.
Activate RAID mode in the BIOS and create the desired array. Then install Windows with the required drivers. Back up your data beforehand, as it may be lost.
Either look in the system settings under ‘Info’ or open the command prompt and enter the command ‘systeminfo’. Both methods will show you the original installation date.
If two-step verification is enabled and no alternative verification method is available, Microsoft cannot help. Without this verification, you should try the sign-in utility or fill out the Microsoft account recovery form to get feedback.
Check the Device Manager (Windows key + X) under ‘Security devices’ for the TPM version. If no TPM is displayed, it may need to be activated in the BIOS.
Activate the Windows clipboard from version 1909 with Windows key + V. Copy with CTRL + C and call up the list of entries with Windows key + V as well.
Open the command prompt as administrator and enter "net user administrator /active:yes" to activate the account. Set a password with "net user administrator *".
Windows 11 requires at least a 1 GHz processor with 2 cores, 4 GB RAM, 64 GB storage space, TPM 2.0 and DirectX 12-capable graphics. Internet and a Microsoft account are required to install Windows 11 Home.
Windows 11 requires at least a 1 GHz processor with 2 cores, 4 GB RAM, 64 GB storage space, TPM 2.0 and DirectX 12-capable graphics. Internet and a Microsoft account are required to install Windows 11 Home.
(en-gb) ▼ 
Klick hier, um diese Seite auf Deutsch zu lesen
Click here to read this page in English
Cliquez ici pour lire cette page en français
Klik hier om deze pagina in het Nederlands te lezen
