cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
This FAQ provides tips on how to isolate the error.
View full article
With the mechanical aquastop system, you can see whether the aquastop has been triggered by the inspection window.
View full article
Information about error messages can be found in this FAQ.
View full article
Please test another socket in another circuit.
View full article
In this FAQ we explain what the error code E4 means and give you possible solutions.
View full article
For some error symptoms there are currently no universal answers.
View full article
Please check the power supply first.
View full article
The appliance is not drawing water, the water pressure is too low or the aquastop has been triggered.
View full article
FAQs on error messages and mechanics of the coffee machine
View full article
For this, the hinges and the mechanics must be mounted on the opposite side.
View full article
By using a light barrier, which creates a virtual wall via infrared signal.
View full article
In this FAQ we explain where you can get codes for universal remote controls.
View full article
In this FAQ we explain the most common faults of your robot vacuum cleaner.
View full article
This will tell you if your memory card is faulty.
View full article
Open the maintenance door on the underside of the Robot vacuum Cleaner.
View full article
The following steps may help if your device does not turn off.
View full article
The error codes E3 and E7 indicate a defect in the heater or sensor.
View full article
FAQs on handling the Robot Vacuum Cleaner.
View full article
In this FAQ you will find useful information about your robot vacuum cleaner.
View full article
There may be a cable break, one of the most common signs of wear on electrical equipment.
View full article
Top Contributors