FAQs

Check the points in this FAQ.

Press the up and down buttons for 10 seconds.

Follow the points in this FAQ.

The display sensor must be recalibrated.

The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.

Optimise your Desktop PC with a BIOS update for your mainboard, but please note that this is done at your own risk and MEDION accepts no liability.

If the MEDION Life+ app reports that the user does not exist, use the Forgot Password function on the MEDION website to receive a new password by e-mail.

In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.

Due to their mechanical components, hard drives can make noises. If unusual noises occur, it is recommended to check the status of the hard drive using system commands and, if necessary, to use the manufacturer's diagnostic software.

Sparks occur if the mains cable is plugged in before connecting to the audio system. To avoid this, first insert the plug into the device and then into the socket.

You can use the antenna connection with either the included wire antenna or another antenna that has a coaxial plug.