cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
You can tell whether the Aquastop has been triggered and the valve has interrupted the water supply by looking at the window or the indicator field of the mechanical Aquastop system.
View full article
You can find this information in the Windows Task-Manager.
View full article
In this FAQ we explain the most common faults of your robot vacuum cleaner.
View full article
Order a suitable remote control via the MEDION Service Shop using your MSN number or model name.
View full article
The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.
View full article
Install the MEDION Speaker App, activate the Wi-Fi mode on the MD 44007 and follow the app's instructions to connect via your smartphone's Wi-Fi settings.
View full article
To clean the dust container and the permanent filter, empty the container and clean the filter. To do this, open the appliance lid, remove the dust container and filter and empty both, rinse with water if necessary, clean the filter with a brush and replace everything after it has dried.
View full article
Tips for changing a WLAN system to a new one.
View full article
Tips and tricks for the sustainable descaling of your coffee maker.
View full article
MEDION devices use an alphanumeric code. Contact the manufacturer of the universal remote control, as the codes are defined there and vary depending on the remote control.
View full article
Perform a reception diagnosis as follows.
View full article
You can find all the information you need in this FAQ.
View full article
Temporarily install another language, change your system to it and now exit S-mode.
View full article
You'll first need to install its language pack (if it's available).
View full article
The soap dispenser is versatile and can dispense disinfectant as well as soap. It is also suitable for washing-up liquid, hand lotion and shampoo.
View full article
The time is transmitted via the RDS signal.
View full article
Here you will find general information about your wireless doorbell.
View full article
In this FAQ we explain what the error code E4 means and give you possible solutions.
View full article
The interface is only accessible via WIFI.
View full article
If there is no connection to your provider the LED lights up red.
View full article
Top Contributors