FAQs

To clean the dust container and the permanent filter, empty the container and clean the filter. To do this, open the appliance lid, remove the dust container and filter and empty both, rinse with water if necessary, clean the filter with a brush and replace everything after it has dried.

Tips for changing a WLAN system to a new one.

Tips and tricks for the sustainable descaling of your coffee maker.

MEDION devices use an alphanumeric code. Contact the manufacturer of the universal remote control, as the codes are defined there and vary depending on the remote control.

Perform a reception diagnosis as follows.

You can find all the information you need in this FAQ.

Temporarily install another language, change your system to it and now exit S-mode.

You'll first need to install its language pack (if it's available).

The soap dispenser is versatile and can dispense disinfectant as well as soap. It is also suitable for washing-up liquid, hand lotion and shampoo.

The time is transmitted via the RDS signal.

Here you will find general information about your wireless doorbell.

In this FAQ we explain what the error code E4 means and give you possible solutions.

The interface is only accessible via WIFI.

If there is no connection to your provider the LED lights up red.

XMP memory can be operated without an XMP profile, but then uses standard JEDEC settings with potentially lower performance. To be able to use the memory with XMP profile, both the mainboard and CPU must be XMP-capable.

Different numeral systems cause storage capacities to be represented differently.

By using a light barrier, which creates a virtual wall via infrared signal.

The temperature unit of the display is set incorrectly. It can be changed via a key combination.

Reach into the opening and pull a little harder to change the filter.

In this FAQ, we explain possible error messages that your device may display.