FAQs

Order a suitable remote control via the MEDION Service Shop using your MSN number or model name.

The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.

To clean the dust container and the permanent filter, empty the container and clean the filter. To do this, open the appliance lid, remove the dust container and filter and empty both, rinse with water if necessary, clean the filter with a brush and replace everything after it has dried.

Tips for changing a WLAN system to a new one.

Tips and tricks for the sustainable descaling of your coffee maker.

MEDION devices use an alphanumeric code. Contact the manufacturer of the universal remote control, as the codes are defined there and vary depending on the remote control.

The soap dispenser is versatile and can dispense disinfectant as well as soap. It is also suitable for washing-up liquid, hand lotion and shampoo.

The time is transmitted via the RDS signal.

In this FAQ we explain what the error code E4 means and give you possible solutions.

By using a light barrier, which creates a virtual wall via infrared signal.

The temperature unit of the display is set incorrectly. It can be changed via a key combination.

Reach into the opening and pull a little harder to change the filter.

In this FAQ, we explain possible error messages that your device may display.

In this FAQ we explain how to clean the impeller of your robot vacuum cleaner.

Open the maintenance door on the underside of the Robot vacuum Cleaner.