cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Please observe the recommended rest periods before switching on.
View full article
This may be due to a blocked drainage channel or a full drip tray.
View full article
This may be due to a faulty power supply.
View full article
In this FAQ we show you two possibilities.
View full article
Log in with the same access data.
View full article
Currently only one user can be added to the Fitness Pro App.
View full article
This FAQ provides tips on how to isolate the error.
View full article
First of all, please check if all inlet valves are open.
View full article
Please start a program for boil wash (90°C) and check whether the porthole heats up during the main wash cycle.
View full article
First, make sure that there is no more water in the machine.
View full article
If the unit does not pump out water, the drain filter may be clogged.
View full article
The transport lock must be removed before initial start-up.
View full article
Carefully remove dirt and debris from the filter under running water.
View full article
Check the power supply first.
View full article
There are two different variants, only one is changeable.
View full article
Test the outlet against another appliance.
View full article
The seam width is fixed by the needles and cannot be changed.
View full article
With the mechanical aquastop system, you can see whether the aquastop has been triggered by the inspection window.
View full article
Check the points in this FAQ.
View full article
The temperature of the water can be felt at the viewing window of your machine.
View full article
Top Contributors