annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
Afficher l'article complet
To clean the dust container and the permanent filter, empty the container and clean the filter. To do this, open the appliance lid, remove the dust container and filter and empty both, rinse with water if necessary, clean the filter with a brush and replace everything after it has dried.
Afficher l'article complet
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
Afficher l'article complet
The error message “Please check clean water tank” can be caused by dirty detectors in the water tank. Cleaning with a salt solution or pH-neutral cleaning agent can help. Also check and clean the dirty water intake opening and the fresh water nozzle.
Afficher l'article complet
The error codes E01-E10 indicate various problems, such as blocked wheels, sensor faults, stuck positions or brush problems.
Afficher l'article complet
The appliance is always switched on using the power button.
Afficher l'article complet
This FAQ explains all the functions of your robot vacuum in offline mode.
Afficher l'article complet
There is a button on the back of the device body for disassembly.
Afficher l'article complet
This can be rectified by updating the device firmware to version V0.3.7.
Afficher l'article complet
In this FAQ you will find useful information about your robot vacuum cleaner.
Afficher l'article complet
Check the points in this FAQ.
Afficher l'article complet
Check the points in this FAQ.
Afficher l'article complet
Follow the instructions in this FAQ.
Afficher l'article complet
The specified suction time includes ECO mode.
Afficher l'article complet
Principaux contributeurs