FAQs

Carefully remove dirt and debris from the filter under running water.

Check the power supply first.

There are two different variants, only one is changeable.

The seam width is fixed by the needles and cannot be changed.

With the mechanical aquastop system, you can see whether the aquastop has been triggered by the inspection window.

Check the points in this FAQ.

The temperature of the water can be felt at the viewing window of your machine.

Question Why does the water from the washing machine not drain away?   Answer If the device does not pump out water, the pump filter may be clogged. The water then remains inside the device and no longer flows out. The first thing to do is to remove the pump filter. Then clean it under running water. If a clogged pump filter can be ruled out, the machine should be pulled forward a bit and checked to make sure the drain hose is not kinked or crushed or below the water level of the drum. If the washing machine still does not work, it is necessary to have it checked by a service technician.   The information in this article refers to: MEDION washing machines ZAYBYC (IRIS-Symptom-Code_A12)   Article in other languages: Deutsch Review Date: 2023-01-04

The transport lock must be removed before initial start-up.

Tipps for cleaning washing machines.

The door remains closed until all water has been removed.

Electrical devices require a reliable power supply.

Tips and tricks for containment.

You should definitely take a look at the following tips in advance.

Make sure that you only use incandescent lamps with a power of 220-240V, max. 10W. The thread should be E14.

There is a printing error in the operating instructions.

In this FAQ we explain the reasons and possible solutions for ice formation in your refrigerator or freezer.

First disconnect the dishwasher from the mains.

There are two different variants.

Here we explain why the dishes remain dirty after the cleaning process.