Hallo Darian Also erstmal muss das Netzteil einen PCIe 8-Pin Stromversorgungsstecker haben, denn diese Grafikkarte RX 580 benötigt einen solchen. Außerdem muss die Leistung des Netzteiles auf 12V für CPU und Grafikkarte und weitere Verbraucher locker ausreichen. Grafikkarte und CPU inkl. Spannungswandler können alleine schon mal 300W maximal ziehen. Deshalb legt man hier gerne mal etwas Reserve oben drauf, damit das Netzteil auch nach ein paar Jahren Alterung der Kondensatoren noch ausreichend ist. ATX Netzteile sind je nach Bauform auch von den Anschlussmaßen und Abmessungen normiert. Dieses Netzteil von Xilence hat ATX PS/2 Format, die Abmessungen sind BxHxT 150 x 86 x 140 mm, siehe Review, da hat wohl jemand nachgemessen. Und das könntest mit Maßband bei deinem verbauten Netzteil auch tun. https://www.technic3d.com/review/netzteile/1921-xilence-performance-a+-430-watt-netzteil-im-kurztest/1.htm Die Gehäuseinnentemperatur (Lufttemperatur) sollte unter 40°C liegen, damit alle Komponenten ausreichend gekühlt werden können. Die Raumtemperatur kann im Sommer schon mal 30°C betragen, dh. die Luft darf sich im PC nur 10°C aufheizen, und muss entsprechend schnell ausgetauscht werden. Der PC heizt dank der stärkeren Grafikkarte wahrscheinlich mit der doppelten Leistung (max. etwa 350W inkl. aller Verbraucher) als zuvor die Luft im Gehäuse auf. Rechnerisch (spezifische Wärmekapazität Luft, 10°C Temperaturdifferenz) müsste also ein Luftdurchsatz von 100 m³/h ausreichen, wenn der Luftaustausch vollständig und gleichmäßig erfolgt. Das sollte mit dem Netzteillüfter und dem hinteren Gehäuselüfter zusammen schaffbar sein, wenn die mit voller Drehzahl laufen. Der obere zusätzliche Gehäuselüfter wäre vor allem dafür angedacht, dass in dem Bereich der Grafikkarte kein Hitzestau entsteht, die Frischluft ins Gehäuse daher vermehrt von dort oben nachkommt. Eine andere fixe Quelle für Zuluft ist der CPU-Lüfter selbst, der durch den Seitentunnel Frischluft von außen ansaugt, aber gleichzeitig auch von CPU-Kühler erwärmt ins Gehäuseinnere bläst. Wenn der Luftstrom m³/h dieser beiden einblasenden Lüfter größer ist, als die der ausblasenden (hinterer Gehäuselüfter, Netzteillüfter), dann herrscht im Gehäuse Überdruck, und die überschüssige Luft strömt selbstständig an div. Öffnungen, zB. entfernte Erweiterungs-Slotblenden über Grafikkarte, aus dem Gehäuse hinaus. Ansonsten herrscht im Gehäuse Unterdruck, und es strömt zusätzliche Frischluft an allen Öffnungen gleichmäßig und nicht gezielt (zB. von vorne unter Frontabdeckung) ins Gehäuse nach. Besser ist jedenfalls, wenn im Bereich der Grafikkarte mehr Frischluft nachströmt, um einen Hitzestau dort zu vermeiden. Siehe mal das Review auf Computerbase zu dem Rechner, für größere Grafikkarten (2-Slot Bauhöhe und größere Grafikkartenlänge) ist ausreichend freier Bauraum vorhanden. https://www.computerbase.de/2017-11/medion-akoya-p56000-aldi-pc-test/3/#bilder Es ist natürlich so, dass es wohl sinnvoller wäre, gleich einen entsprechend konfigurierten leistungsfähigeren PC zu kaufen, als im nachhinein einen schwächeren PC so aufzurüsten. Und was macht man mit den alten Teilen? Es droht auch Garantieverlust, wenn zB. das neue Netzteil dann einen Defekt hat und die ganze Hardware grillt. MfG. K.B.
... View more