About PeterB79

PeterB79 · ‎14.08.2024

Hi @Major_ToM Thank you for the reply, no problem at all. Looking at the reaction to the current beta microcode update (0x129) it's not been greatly received as it can dramatically drop performance and in some cases cause the CPU's to still exceed their maximum safe voltage (1.55v) so I think more time is needed to polish this update. I've done some testing with my CPU and it doesn't seem to pull more than around 1.25v under load so I think it'll be fine. I've never had any stability issues, but I only use it for games so nothing too taxing.

PeterB79 · ‎01.08.2024

Hi, I guess this post really goes for all people with 13th/14th gen i7/i9 CPU's Will Medion be releasing a BIOS update for the widespread Intel 13th/14th gen CPU's with the microcode issue later this month after Intel release the update? I have an Engineer X32 (MSN: 1002 5109) and I'm concerned that if there's no update my CPU (13700) could end up having problems. So far it's fine as far as I can tell, but I'd like peace of mind as I'm sure others will. Thanks.

PeterB79 · ‎31.01.2024

Hi @Major_ToM Thank you, I'll also keep an eye out of the downloads page for the PC.

PeterB79 · ‎29.01.2024

@Major_ToM Thank you for finding out and getting back to me. It's not the answer I was hoping for, but your help is appreciated. I'll probably swap out the main board later down the line, for now the performance is fine. Did they say whether there was an update to the old BIOS version?

PeterB79 · ‎24.01.2024

@Fishtown The light centre works, thank you for that. 🙂 Now I just need to figure out how to get the RAM running at full speed. I've upgraded to 32GB 6400MHz RAM, but still it's only running at 4400MHz.

PeterB79 · ‎24.01.2024

Brilliant, thank you @Major_ToM

PeterB79 · ‎24.01.2024

Hi Fishtown, The MPN is: 10025109. Thank you for the suggestion and link, I'll try that later today.

PeterB79 · ‎23.01.2024

Thank you for the reply, I'll wait to see if a moderator replies in the next couple of days, if not I'll contact one of them. I just spotted that I posted this in the wrong forum...whoops!

PeterB79 · ‎23.01.2024

Hi all, I've just purchased a Medion Engineer X32 and I have a few questions, I'm hoping you can help. Firstly, the Samsung 16GB DDR5 4800MHz is only running at 4400Mhz. I've looked in the BIOS (which seems very out dated) and can find nowhere to adjust the multipliers or enable XMP. That brings me to the BIOS version, it's very old (760H7EMW0X.102, from 27/12/2022), where can I find an update, should one exist? The board seems to be an ECS B760H7-EM V1.0. I've checked the ECS site and it doesn't exist. Does anyone have a link to this board? Even Google isn't too helpful here, is it a custom board for Medion? I've checked the Medion site and there's no downloads for this machine on the support page. And finally the RGB, how do I turn it of, or at least fix the colour? Thanks in advance.