General Technical Knowledge Base

DisplayPort is a digital display interface developed by the Video Electronics Standards Association (VESA).

The MAC address is the hardware address of each network adapter, which serves as a identifier in a computer network.

The aim of WPS (Wi-Fi Protected Setup) is to simplify the addition of devices to an existing Wi-Fi network.

With DFS, a Wi-Fi can perform an automatic channel change if another device is detected on the channel in use.

A device driver is a computer program that operates or controls a particular type of device that is attached to a computer.

The refresh rate is a term used in film, television and computer technology.

A MAC filter is a network access protection that only allows devices with a MAC address to access the network.

Today's personal computers (PCs) usually have hard disk storage built directly into the computer's casing, where they store their directories and files.

The diskpart command interpreter helps you to manage your computer's drives.

The produced TFT panels are distinguished in pixel error classes.

M.2 is a specification from 2013 for internally mounted computer expansion cards and associated connectors.

IRIS is an international standard for the structured recording and documentation of fault symptoms, conditions and repairs.

A WWN or WWID is a unique identifier used in storage technologies.

A protocol, which can secure the boot process by preventing the loading of drivers or OS loaders that are not signed with an acceptable digital signature.

A WWNN is a World Wide Name assigned to a node in a Fibre Channel fabric.

MEDION AG is a German consumer electronics company owned by Lenovo. It operates in Europe, the United States, and the Asia-Pacific region. The company's main products are computers and notebooks, but also smartphones, tablet computers, digital cameras, TVs, refrigerators, toasters, and fitness equipment.

The TPM is a chip that adds basic security features to a computer or similar device.

Memory modules with Error Correcting Code (ECC) can correct all 1-bit errors and detect all 2-bit errors and some multi-bit errors.

Extreme Memory Profiles are supposed to improve the utilization of the memory speed.

An EC is an IC that controls various low-level tasks in a system.