abbrechen
Suchergebnisse werden angezeigt für 
Stattdessen suchen nach 
Meintest du 

How do I carry out a residual current discharge on my robot vacuum cleaner?

Question

How do I carry out a residual current discharge (power pack / battery set) on my robot vacuum cleaner?

 


Answer

Follow these steps:

  1. Switch off your device.
  2. If your device has a main switch, switch it to 0 or OFF.
  3. Remove the battery cover or the bottom cover of the device.
  4. Carefully disconnect the battery from the device using the connector plug.
  Residual current discharge1.jpg Residual current discharge2.jpg Residual current discharge3.jpg
  1. Press the main switch 0 / I or On / Off approx. 10 times. If your appliance does not have a main switch, press and hold the On / Off switch for approx. 10-15 seconds.
  2. Reconnect the battery to the device and reinsert it.
  3. Reattach the battery cover / device cover.
  4. Restart your device.

Versionsverlauf
Letzte Aktualisierung:
‎04.11.2024 08:12
Aktualisiert von:
Beschriftungen (3)
Mitwirkende