cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
In standby mode, press the ‘Start time’ button on the remote control until the time flashes on the display. Then press the yellow button on the remote control to confirm the setting.
View full article
Dock the robot vacuum cleaner manually, remove the mop beforehand and set the charging station upright. If problems persist, optimised charging contacts can be requested via MEDION Service.
View full article
This may be caused by a swollen battery, which poses a fire risk. MEDION advises you not to use or charge the device and to prepare it safely for disposal.
View full article
Switch off the robot vacuum cleaner, remove the battery, press the main switch several times or press and hold the on / off switch. Then reinsert the battery and restart the appliance.
View full article
The robot vacuum cleaner can only be used offline by pressing the start / pause button for vacuuming and mopping, as well as returning to the charging station. Many advanced functions and scheduled cleaning are not available without the app.
View full article
To clean the dust container and the permanent filter, empty the container and clean the filter. To do this, open the appliance lid, remove the dust container and filter and empty both, rinse with water if necessary, clean the filter with a brush and replace everything after it has dried.
View full article
You can use the MEDION service portal to contact us, initiate repairs, receive troubleshooting tips, register products and monitor service processes.
View full article
The error message “Please check clean water tank” can be caused by dirty detectors in the water tank. Cleaning with a salt solution or pH-neutral cleaning agent can help. Also check and clean the dirty water intake opening and the fresh water nozzle.
View full article
The error codes E01-E10 indicate various problems, such as blocked wheels, sensor faults, stuck positions or brush problems.
View full article
This can be rectified by updating the device firmware to version V0.3.7.
View full article
In this FAQ you will find useful information about your robot vacuum cleaner.
View full article
Top Contributors