À propos de plutissimo

plutissimo · ‎14.06.2024

Hi @Major_ToM , Thank you for the update. I await for you to come back when you know more. Thx, plutissimo

plutissimo · ‎06.06.2024

Hi @Major_ToM Is there any answer to the previous post? Thx, plutissimo

plutissimo · ‎24.05.2024

Hi @Major_ToM Do you have any further advice or instructions? I searched the web a bit and it seems like your BIOS-supplier American Megatrends has some firmware update utilities. Any of those that would work? Thanks, plutissimo

plutissimo · ‎22.05.2024

I eventually shut down the computer and thankfully had no problem booting it up. Checking with CPU-Z, I am still running the .107 firmware. Adventurous as I am, I tried the update process again. However no luck this time either. Now I did get an error message immediately. Translated error text: "Windows encountered an error when the firmware should be installed. Windows found the firmware for the unit, but an error occurred when it would be installed." Then I am encouraged to contact the manufacturer of the device. 🙂

plutissimo · ‎21.05.2024

Hi @Major_ToM , Thanks for the file and the instruction. However, it doesn't seem to be working on my B660. It gets stuck in the updating firmware process and never gets past that point (see screenshot below). I let it run for over 1 hour, before trying to cancel. But now it doesn't let me do that either. Great...:-( Any other instructions? At some point I have to shut down the computer and then we'll see what happens... If it boots up again after all...

plutissimo · ‎16.05.2024

Hi @Major_ToM , OK. Then I will wait for you to post an update when its available. Thanks, plutissimo

plutissimo · ‎15.05.2024

@Major_ToM Tried running the WHF.bat file (as adiminstrator as instructed) but nothing happens. After approving that windos run waht it deems as un unsafe software, then... nothing. I tried multiple times. Any other way to start this FW update? /plutissimo

plutissimo · ‎10.05.2024

Thanks @Major_ToM . I'll try the bios update that you just posted and see what improvements there are. However, the "readme" file did not contain any instructions for the bios update. And there are several program files in the zip-folder. Which one should I run? Are there any instructions somewhere else? /plutissimo

plutissimo · ‎09.05.2024

@Juze-81 Did you try out updating the Bios with the one linked by @Major_ToM ? Did it include any improvements or new capabilities vs the stock bios B660H7W0X.107? /plutissimo

plutissimo · ‎09.05.2024

OK. Thx. /plutissimo

plutissimo · ‎09.05.2024

OK. So it doesn't show if it is dual channel capable or not until there are two memory modules installed. Got it. Hence the only way to really know is to buy and add a memory module of same specs, right? - DDR4 - 3200 MHz - 8 GB - CL 22 - 1.2 V Anything else that needs to match? Does anyone already know if the motherboard is dual channel capable or am I doing this for nothing? The bios is the most limited I have ever seen, so I am afraid the motherboard might be so as well. Thx, plutissimo

plutissimo · ‎09.05.2024

@daddle Can you please explain what you mean? In addition to the tabs in the screen shots in my previous posts, where could I look within CPU-Z? /plutissimo

plutissimo · ‎09.05.2024

Sorry for the delay. Here are the screenshots from CPU-Z. Where do I see if the installed RAM is cabable of running in "dual mode"? Thx /plutissimo

plutissimo · ‎27.04.2024

Thank you @daddle . I haven't booted up the computer yet, as I want to make sure it is upgradeable before I do. The RAM is a Hynix HMA81GU6DJR8N-XN. This matches: https://memory.net/product/hma81gu6djr8n-xn-sk-hynix-1x-8gb-ddr4-3200-udimm-pc4-25600u-single-rank-x8-module/ Apart from seeing that it is a quite slow CL22 memory, is there something in the spec that shows if the module works in dual channel mode? And what specs need to match if i buy a second one? It does not seem that the one inside is readily available. Thx, plutissimo

plutissimo · ‎27.04.2024

Hi, I have bought a Medion Erazer Recon P20 MD35348 and would like to upgrade the RAM and add an SSD. I have read plenty of threads in this community and from what I understand you have to be very careful to buy something that is compatible. However, I cannot seem to find information about exactly what is compatible. Can anyone please help with what the requirements are? Stock configuration as I understand it: - Intel B660 chipset - 8 GB DDR4 PC3200 RAM - 512 GB SSD M.2 - MSN: 10024815 I would primarily like to buy another 8GB RAM module that matches the existing in the spec, but if that doesn't work two new RAM modules that are compatible with the motherboard. Thanks!

Date d'inscription	‎27.04.2024 10:31
Date de dernière visite	‎14.06.2024 20:48
Total de messages envoyés	15
Total de compliments reçus	4

À propos de plutissimo

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: MEDION ERAZER RECON P20 new RAM

Re: Medion Erazer Recon P20 RAM and SSD

Re: Medion Erazer Recon P20 RAM and SSD

Re: Medion Erazer Recon P20 RAM and SSD

Re: Medion Erazer Recon P20 RAM and SSD

Re: Medion Erazer Recon P20 RAM and SSD

Medion Erazer Recon P20 RAM and SSD

Informations juridiques

MEDION Online

À propos de la MEDION