About Kworth

Hi again @daddle , and many thx for your patience and attitude. I did a lot of try and error (almost 10 days of different trials): switching in the bios the option to boot from the "IGD" (internal) or the external from PCIe ( I think it was named "PEG"), and "Auto" as well, but that did not worked out either. Maybe there was some subtlety I forgot to do a t the time as well, but the result was the same: no booting. I did not know nothing about Fastboot UEFI to be turned off/deactivate. I will repeat the trial with this option as you suggest.   I will also try the second option you propose. Only I dont understand what you mean by "switch the graphic card". Do you mean unplug from the PCIe x16 and plug it in again?. Or unplug the power cables leaving the card plugged in?. As far as I recall there is not any switch in the card to turn it on/off. Could you please be more precise? Best regards Kworth ... View more

Hi @daddle  Kworth here. Thanks for your response and support. In my case, I do have UEFI bios, although when I get to it through Win advanced settings management, it provides the option to "change UEFI firmware" , therefore I assume that my bios is UEFI, however the output/screen of the bios is the old and classic AMI look. Additionally, when I run CPU-Z to the system, the output file does not mention anyware UEFI, as you can see in the snapshot files I attach. I hope this info gives you some more hints to troubleshoot the issue. Do not hesitate to ask for more, if necessary.   I have returned the AMD RX580 card but I still have the GTX560 and could keep trying it, with your advise. Thx in advance an best regards Kworth ... View more

Hi @Gehringer and thanks for your reply. I am almost convinced that the best (and most costly) solution is to buy a new PC. Six years of operation with the current PC is more than normal , and the system cannot tolerate the brand new technologies. It´s time for a renewal. However, I will keep the current system as slave to the new one, so I hope I will come back to the community forum from time to time. Best regards Kworth ... View more

Hi Xaeldaren I have the same problem with mobo M7848, with two different graphics cards: GTX560 and RX580. I have tried all sorts of solutions with no succes. It seems like the PCIExpress 1.0 does not recognize cards designed for PCIExpress 2.0 and 3.0.   Have you found the solution to this issue or is it  necessary to replace this (old) motherboard by a new one with PCIExpress 3.o on board? Regards Kworth ... View more