How do I set the start delay on my MD 19100 Robot Vacuum Cleaner?

[#1]

Question

How do I set the start delay on my MD 19100 Robot Vacuum Cleaner?

---

Answer

The Robot Vacuum Cleaner must be in standby mode (the blue LED lights up). Then simply go through the following steps:

1. Press and hold the (30) Start time button on the remote control until the time flashes on the display.
2. Set the desired time delay and, while the time display is still flashing, hold the remote control in the direction of the robot vacuum cleaner and press the yellow button (25).
3. The robot vacuum cleaner finally emits a short beep as confirmation.

If you want to set a different start delay, proceed again as described above. If you want to delete the start delay, switch the device off and on again at the bottom.

⚠️Note⚠️: Removing the battery from the remote control does not cancel the start delay.

⚠️Important⚠️: The remote control must have visual contact with the robot, there must be no obstacles in between.

This FAQ supplements chapter 7.1 Setting the start delay of the international manual (DE, FR, NL, ES, IT DK, SE + NO).

---

The information in this article refers to:

• Robot vacuum cleaner MEDION MD 19100 MSN 50064911
• Robot vacuum cleaner MEDION MD 19100 MSN 50065539
• Robot vacuum cleaner MEDION MD 19100 MSN 50066153
• Robot vacuum cleaner MEDION MD 19100 MSN 50067022
• Robot vacuum cleaner MEDION MD 19100 MSN 50067746
• Robot vacuum cleaner MEDION MD 19100 MSN 50068123
• Robot vacuum cleaner MEDION MD 19100 MSN 50068444
• Robot vacuum cleaner MEDION MD 19100 MSN 50072129

ChangeLog:

• 2024-11-07
  Initial version

Article in other languages:

• Deutsch

Review Date: 2025-05-07