Informationen zu Polo111

Polo111 · ‎18.11.2025

Hello everyone. When i boot up my laptop with Windows11, from time to time, my Erazer Deputy P60i starts emitting strange sounds like an alarm. They are repeating at about 4-5 seconds interval and they are very loud. Today after the fifth horn-blaring sound, i've connected the charger and the sound stopped. A quick glance showed me the battery was about 30%. its possible the charge indicator is wrong and the sound was actually a low battery warning? I keep the charging setting to charge the battery at 100%. It's ok for this laptop ? or should i use personalized charging ? thank you in advance. Polo

Polo111 · ‎01.10.2025

"Disclaimer :- Upgrades and modifications to your PC/laptop should only be carried out by a qualified specialists. If you do not have the necessary qualifications, have the work carried out by a qualified service technician." i know and i am the qualified specialist. unfortunatelly at the time i was the slightly drunk qualified specialist 😔 removing the cmos battery is not clearing the uefi pass. thank you for taking your time to respond edit : fortunatelly for me, i have the habit to keep a logbook when im working . found the password there and the note " at least you're not driving :)"

Polo111 · ‎30.09.2025

Hello, i know there is a slim chance for this but still i ask : is there a way to reset the UEFI password for Erazer DEPUTY P60i? thanks in advance . P.S. - don't try to change the UEFI password after your anniversary - too much wine involved 😑

Polo111 · ‎16.03.2025

Hello again @Fishtown, thanks for your fast and helpful response. seems the second emplacement is gen3 (the red one (13) ). https://www.amazon.fr/stores/page/68E4C5AD-BEE0-4227-AB92-74911E2AC10D/search?ref_=ast_bln&terms=deputy%20p60i seems 2 TB is also possible. anyone tried with higher capacity ? also in that link are the compatible memory banks bye

Polo111 · ‎14.03.2025

@Stareyes there are 13 screws. i 've opened the case very easy : start left side, where the usb 3 ports are located. use an old credit card to gently lift the zig-zag model. go all around and gently pull. the case will then open with ease. the RAM and nvm will be immediately accessible. the second nvm doesn't have termal pad.

Polo111 · ‎14.03.2025

Hello, i've searched in the manual, and it's marked that 1 nvm is gen3 and the second one is gen4. i'm guessing the one who's already occupied with Phison 512GB ( right side, closer to memory and battery ) is the gen4 port ? and the other one is the gen3? someone can confirm ? also i didn't found whats the maximum size for nvm i can install. thanks in advance

Polo111 · ‎08.03.2025

Thank you for your fast response. Everything is going well with disassembly . Have a nice weekend

Polo111 · ‎08.03.2025

Hello @Fishtown and everyone . I've recently bought a Medion Deputy P60i. Can you send me, please, the disassembly instructions ? I need to upgrade the storage and RAM. Thank you.

Registrierdatum	‎08.03.2025 09:24
Datum des letzten Besuchs	‎19.11.2025 00:30
Summe gesendete Nachrichten	8
Summe erhaltener Kudos	1

Informationen zu Polo111

Alarm-like sounds

Re: password reset for UEFI Erazer DEPUTY P60i

password reset for UEFI Erazer DEPUTY P60i

Re: P60 Deputy MD62588 Disassembly

Re: P60 Deputy MD62588 Disassembly

Re: P60 Deputy MD62588 Disassembly

Re: P60 Deputy MD62588 Disassembly

Re: P60 Deputy MD62588 Disassembly

Rechtliche Informationen

MEDION Shops

Über MEDION