@sweetpoison schrieb: If you decide to use AOMEI Data Backuper there's what you need to do: (---) 3. Install and run Backuper. Make a bootable USB stick with windows PE support. (---) 3. Under Backuper select disk "back up" then select the OS disk as source and the usb stick as destination. Try to do this right in 1st try because on second back up the size of image is double (no idea why and since it's a free program I can't complain either). Hi @sweetpoison I would not backup to an USB Stick. I'll do a backup to a mobile ssd (128 GB SSD 30,- € plus adapter cable SATA to USB 3.0, 7,-€) which is much faster than most USB sticks. With a 64 GB SSD mobile connected SSD its even cheaper. Just make use of the USB stick, if necessary, to start the portable copy of AOMEi Backupper. With this you can restore your image from the SSD to the new drive if you have to swap it. That is very easy, and with the mobile ssd very fast. If you have both drives, old and new built in parallel , it's more easy to make a direct copy with the MiniToolPartititonWizard, or make use of it's assistent to Migrate OS. If your free version of AOMEI Backupper pro allows, you also can off course use it's Klon function for direct migrating your OS. regards, daddle
... View more