What can I do if the radio switches itself off?

Er · ‎11.03.2021

Question

We offer a firmware update for the radio, which you can download from this link.

Proceed as follows to install it:

download the file from our server and unzip the ZIP file
copy the unzipped files into the root directory of an empty USB stick
set the system volume to medium (neither too loud nor too quiet), because the later process will generate a notification with a beep sound
connect the USB stick to the device while it is in standby mode
turn on the device and switch to USB mode
the display will show UPGRADE and a short beep will sound, indicating that the CD firmware update is starting
wait until the software update is finished (the power supply must not be interrupted, otherwise the device cannot be switched on anymore!)
after the software update is finished, which takes about one minute, you will hear a long beep sound
then press the power button to switch back to standby mode
then disconnect the power, remove the USB stick and wait until the device is completely discharged

To check if the firmware update was successful, proceed as follows:

switch the device to CD mode (there must be no CD in the device) NO DISC is shown on the display
press and hold the STOP button for 5 seconds
the firmware version will be displayed for 5 seconds, the last two digits of the version number should be 16

The information in this article refers to:

Review Date: 2022-02-24